| 铸铜佛像的保养方法 |
| 添加时间：2019/10/18 15:18:49 浏览次数： |
| 铸铜佛像的保养方法 Maintenance method of bronze Buddha statue 1、一些铸铜佛像由于长时间摆放，表面会出现一些暗哑现象，使其表面显得非常破旧且暗淡无光，可以用一些轻柔丝质的棉布来擦拭，注意力度不要太大，这样可以使铸铜佛像重获光彩。 1. Some bronze statues will appear dull on the surface due to long-term placement, which makes the surface look very shabby and dull. You can use some soft silk cotton cloth to wipe it, and pay attention not to use too much force, so that the bronze statues can regain luster. 2、一些大型的铸铜佛像表面的尘土，一定先用电吹风的冷风吹一下，要注意必须是冷风，然后用麦秆刷清洁一下，再用软毛刷收尾。 2. The dust on the surface of some large-scale bronze Buddha statues must be first blown by the cold wind of the electric blower. It must be noted that the wind must be cold, then cleaned with a straw brush, and then closed with a soft hair brush. 3、对于一些大型的铸铜佛像缝隙等细微之处，可用棉花球蘸上口水来清洁，要注意按一定的顺序，不要有遗漏的地方。 3. For the cracks of some large-scale bronze Buddha statues, the cotton ball can be dipped in the saliva to clean them. Pay attention to a certain order and do not have any missing places. 4、尽量将铸铜佛像放置在干燥的环境中，湿度相对保持在40%-50%范围内，温度保持在8℃-24℃，避免空气污染物和尘土。 4. Try to place the bronze Buddha statue in a dry environment, keep the relative humidity in the range of 40% - 50%, and the temperature in the range of 8 ℃ - 24 ℃, so as to avoid air pollutants and dust. 5、防止铸铜佛像与化学物质接触，例如酸类、碱类、油脂等。 5. Prevent the bronze Buddha from contacting with chemicals, such as acids, alkalis, oils, etc. |
| 上一页 铸铜雕塑 鎏金铜狮故宫铜狮子铜雕动物铜雕佛像唐县鑫兰铜雕 |
| 下一页 铸铜佛像韦驮菩萨像藏族佛像厂家专注于铜佛像以及铜浮雕铸造 |
Copyright © 技术支持：遨游网络